Description

Indian Cables & Electricals Pvt. Ltd. is a authorized 3M Cold Shrink Solutions provider in Pune, Maharashtra. Discover 3M Cold Shrink Solutions 3M makes the products you need for that peace of mind. • Over 40 years ago, 3M pioneered cold shrink technology • Withstand extreme environmental conditions • Lower installed cost • Permanent, durable environmental seal and insulation 11/22/33 kV – Medium Voltage (MV) Termination 3M terminations are based on specially formulated, track-resistant, silicone rubberi nsulators with “built-in” Hi-K stress relief • 3M “built-in” Hi-K provides a dielectric constant of approximately 25, distributing the electric field well beyond the shield cutoff. This greatly reduces the stress gradient at the end of the shield, thus helping to ensure long-lasting performancein medium-voltage applications • Resistant to severe weathering, temperature extremes, heavy moisture and prolonged industrial contamination. 3M termination kits offer you: • Fast, easy installation • Reliable, long-lasting materials • Solutions to fit your specs 11/22/33 kV – Medium Voltage (MV) Splice 3M splice solutions can help you reduce the time, labor and cost involved in both above and below splice applications. What’s more, every 3M splice has been 100% factory tested on power cable, so you can be assured of dependable performance, stability and long life with every splice you make. Description: One-piece multilayer silicone splice body • Integrated stress control device, insulation and outer semi-conductive layer • Permanent radial pressure guarantees a reliable function over the entire lifetime the outer semi-conductive layer re-establishes the cable screen • The insulation of the splice body replaces the cable insulation across the entire splice • The integrated refractive stress control provides the proper electric field distribution • 3M Scotch® Tape 13 is applied over the connector and forms the inner conductive electrode 66kV / 72.5kV Termination Advantages: • Lightweight • Proven Cold Shrink reliability • Installs without heat, reducing worker safety risk • Class I Termination Cold Shrink Termination Kit is designed for Cables up to 72.5kV (Umax) Voltage class, single core polymeric power cable systems. Certifications: The 3M QTEN termination meets AND exceeds the requirements of IEC Standard 60840. Applications: • Designed to terminate 72.5kV (IEC) power cables • Covers conductor ranges up to 1200 mm2 • Designed for polymeric insulated cables Features: • Accommodates crimp or mechanical lugs • Solderless earth connection • Thick walled, silicone rubber • Physical protection • Moisture sealing • Silicone outer rain sheds ideal for contaminated, industrial or coastal environments 66kV / 72.5kV Splice Cold Shrink Joint Kit is designed for cables upto 72.5kV Umax voltage class. The cold shrink joint body is a one-piece molded design made of specially formulated silicone rubbers. Features: • One-piece cold shrink joint body • Each joint body is 100% factory tested, for greater reliability and longer service life • No special tools or flame required for installation • Kit covers wide range of cable sizes and types Applications: • Designed for polymeric insulated cables • Covers inline and cross bond splicing applications • Suitable for cable size and type transitions • Covers conductor ranges up to 1200 mm2 110kV (123kV) / 132kV (145kV) Termination Dry Termination TD-II Family for up to 123kV Applications Description: • One-piece dry termination, for indoor or outdoor installations Applications: • Conductor size up to 800 mm2 • Meets class 3 (heavy pollution) requirements • Not self-supporting, requires holding structure Features: • Light weight • Dry design – does not require liquid dielectric • Can be installed at any angle or inverted • No special maintenance required • Top – and bottom – sealing system based on proven cold shrink technology • Alternating sheds (skirts) • One-piece factory-tested push-on termination body Wet Silicone Termination TS-II Family with Cold Shrink Stress Cone for up to 145kV Applications Description: • Self-supporting, outdoor termination with composite insulator applications • Conductor size up to 1,200 mm2 • Can accommodate a variety of pollution classes and lengths • Maximum installation angle of 30° Features: • One-piece pre-molded cold shrink silicone stress cone • Light-weight construction, approximately 1/3 the weight of most porcelain Terminations • Easier handling, transportation and installation than porcelain insulator • Hydrophobic silicone materials provide excellent environmental performance • Smooth surface enables self-cleaning properties • Less sensitive to earthquakes, vibrations and thermal variations • Internal shear bolt connection option eliminates need for crimp-type connections • No special tools required • One kit covers a wide range of cable sizes Alternating sheds (skirts)